>>891935if you mean the seal across the bottom of the door... take a look at the middle of it and see if it has a notch cut in it... usually an inch to two inches long...
the original design had no notch... they updated it because water gets stuck in front of it and then leaks over the edge... the notch lets water back into the dishwasher... also make sure the 2 tiny plastic splash guards are in place in the corners...
http://www.emaservicetips.com/pdfs/25_Service_Flash_DW071_Water_Leaking_from_Bottom_of_Door.pdf service bulletin will work for any model that has the seal.. it says you need to buy the new seal... I do appliance repair.. the only difference between them is the notch cut in it... clip the one you have to match the picture... make sure the splash guards are in the corners..
picture of splash guard is at bottom of bulletin..
fun fact b2b.frigidaire has all their manuals and service bulletins for both electrolux and frigidaire products... sign in name is "service", password is "tips"
