/po/ - Papercraft & Origami

[51 / 4 / ?]

57KiB, 316x159, 1398867220486.png

View Same Google ImgOps iqdb SauceNAO

pepPatch

Anonymous Sun 30 Aug 2015 07:43:58 No.529802 View Reply Report Delete

Quoted By: >>529829

Is there a PDO patch for Pepakura Designer 3.1.6?

And maybe someone could share hi res 3.1.6?

Anonymous

Anonymous Sun 30 Aug 2015 19:31:22 No.529829 Report Delete

Quoted By:

>>529802
https://mega.nz/#!I1BCRTIR!oOkRDMyOx02xUBMB4QnWOfWIGIZqEM81QPSvE8rkMv8
idk if works but try.
Its for 3.1.5.
I want patch for High Pepakura Resolution Version

Anonymous

Anonymous Mon 31 Aug 2015 04:26:53 No.529840 Report Delete

Quoted By: >>529865

0001EC84: 0F95C3 -> 32DB90
00092C7A: 01 -> 00
00094DA0: 894108 -> 909090

Open pepakura3.exe in a hex-editor and go to the offset on the left.
You'll find the bytes before the arrow there, change them to the ones after the arrow.

I'll do a proper update to the patcher when I can get my hands on the latest HR version.

Me Mon 31 Aug 2015 19:41:01 No.529865 Report Delete

Quoted By: >>529884

>>529840
ok here is the hd version....I would like the patches for both like you did last time for me

http://www.mediafire.com/download/09t561b48f1jti2/setup_pepakura_h316_en.exe

Anonymous

View Same Google ImgOps iqdb SauceNAO PepPatch.png, 59KiB, 316x159

Anonymous Tue 01 Sep 2015 04:07:52 No.529884 Report Delete

Quoted By: >>529886 >>529943

>>529865
Done. Enjoy:
https://www.mediafire.com/?2yg2y2wuaugagx5

Manual instructions:

Standard:
0001EC84: 0F95C3 -> 32DB90
00092C7A: 01 -> 00
00094DA0: 894108 -> 909090

High Resolution:
0001EEE4: 0F95C3 -> 32DB90
0009386A: 01 -> 00
00095990: 894108 -> 909090

Anonymous

Anonymous Tue 01 Sep 2015 06:35:41 No.529886 Report Delete

Quoted By: >>529888

>>529884
Can't save any file.

Anonymous

Anonymous Tue 01 Sep 2015 07:28:06 No.529888 Report Delete

Quoted By: >>529896

>>529886
Saving works fine for me, do you get an error message?

Anonymous

Anonymous Tue 01 Sep 2015 11:13:18 No.529896 Report Delete

Quoted By: >>529897

>>529888
Not that anon, but I have the same problem.

Pepakura Designer 3 (High Resolution Version)
---------------------------
A registration keycode is required for saving/exporting data.
---------------------------

Anonymous

Anonymous Tue 01 Sep 2015 12:25:59 No.529897 Report Delete

Quoted By: >>529911 >>529912

>>529896
Odd, I'll look into it. In the meanwhile have you tried re-entering your serial?

Anonymous

Anonymous Tue 01 Sep 2015 15:37:08 No.529911 Report Delete

Quoted By:

>>529897
>have you tried re-entering your serial?
Sorry. I don't know why I didn't think of that.
That fixed it.

Thanks, it's working perfectly now.

Anonymous

Anonymous Tue 01 Sep 2015 15:50:50 No.529912 Report Delete

Quoted By:

>>529897
what serial that you used?

Me Wed 02 Sep 2015 17:48:51 No.529943 Report Delete

Quoted By:

>>529884
>https://www.mediafire.com/?2yg2y2wuaugagx5
thanks bud

Anonymous

Anonymous Sun 27 Sep 2015 05:05:06 No.530876 Report Delete

Quoted By: >>530893 >>531066

Version 3.1.7 is out. Patching instructions for standard version:

0001EC94: 0F95C3 -> 32DB90
000932AA: 01 -> 00
000953D0: 894108 -> 909090

Hi-Res version anyone?

Me Sun 27 Sep 2015 18:02:17 No.530893 Report Delete

Quoted By: >>530972

>>530876
http://www.mediafire.com/download/3adqbjknkcd228a/setup_pepakura_h317_en.exe

you know I want the auto patch....right....

MF Mon 28 Sep 2015 22:23:37 No.530972 Report Delete

Quoted By:

>>530893
Thank you very much

MF Wed 30 Sep 2015 10:02:55 No.531047 Report Delete

Quoted By:

Here is interesting link for official hires3.14a:
http://www.tamasoft.co.jp/pepakura-en/download/designer_hires/bin/09482/setup_pepakura_h314a_en_st.exe

You even can see this folder here:
http://www.tamasoft.co.jp/pepakura-en/download/designer_hires/bin/

Me Wed 30 Sep 2015 18:12:08 No.531066 Report Delete

Quoted By: >>531125

>>530876
I hope I didn't get stiffed here...if I did then your source will be dried up

Anonymous

Anonymous Thu 01 Oct 2015 16:04:03 No.531125 Report Delete

Quoted By: >>531136 >>531141 >>531152

>>531066
Sorry man, i was busy. Not an original patch maker, so patch is different.
http://rghost.ru/6yx9G2J4S
Click on "cкaчaть" button. on top

Me Thu 01 Oct 2015 17:28:53 No.531136 Report Delete

Quoted By:

>>531125
>http://rghost.ru/6yx9G2J4S
got it... thanks

Me Thu 01 Oct 2015 17:46:22 No.531141 Report Delete

Quoted By: >>531170

>>531125
well it didn't work...it still asks for the file password for locked files...that's the patch I need

Anonymous

Anonymous Thu 01 Oct 2015 23:14:35 No.531152 Report Delete

Quoted By:

>>531125
File has malicious!

Anonymous

Anonymous Fri 02 Oct 2015 11:43:46 No.531170 Report Delete

Quoted By: >>531177

>>531141
I found an error in high resolution bat-file - you need to change "std" to "hires". But standard version must work. Which file did you run? Try to run "std.bat" as administrator.

Me Fri 02 Oct 2015 17:32:35 No.531177 Report Delete

Quoted By: >>531193

>>531170
using the hires one and following what you told me to try did not work either....locked files are still locked and asks for password

Anonymous

Anonymous Sat 03 Oct 2015 04:56:18 No.531193 Report Delete

Quoted By: >>531207

>>531177
Looks like you have permission issue.
Here is corrected patch for Hi-Res version. Run "hires,bat" as administrator. If it doesn't work, i put already patched file too.
https://file.io/2frG77

Me Sat 03 Oct 2015 18:27:29 No.531207 Report Delete

Quoted By: >>531208

>>531193
>https://file.io/2frG77
gee I'm just striking out here....the link is 404ed

Anonymous

Anonymous Sat 03 Oct 2015 18:33:02 No.531208 Report Delete

Quoted By: >>531209

>>531207
Why don't you just manually patch it?

Me Sat 03 Oct 2015 18:37:57 No.531209 Report Delete

Quoted By: >>531235

>>531208
don't know how...and don't have the program to do it...

Anonymous

Anonymous Sun 04 Oct 2015 10:31:10 No.531235 Report Delete

Quoted By: >>531270

>>531209
The first time I heard about these patches I didn't know how to do it either. But it's really easy.
Also there are dozens of programs that can do it, most of them free and/or open source.

I personally recommend the freeware HxD, but any hex editor will do it, basically.
http://mh-nexus.de/en/hxd/

Just remember to backup your .exe file when starting out and you will be fine even if things go wrong.

Me Sun 04 Oct 2015 18:00:41 No.531270 Report Delete

Quoted By: >>531289 >>531290

>>531235
ok I downloaded and installed the program...opened pepakura hi res in it and I see a lot of scary numbers and letters....can you walk me through on what I need to change....explain it in a way that a 2 year old will understand...lol....also then manual numbers posted is for the standard version....would those work for the hires

Anonymous

Anonymous Mon 05 Oct 2015 09:10:48 No.531289 Report Delete

Quoted By: >>531290

>>531270
>also then manual numbers posted is for the standard version
Sorry, I didn't realize that. It won't work.
Do you even care about the standard version? If not, then give me a while and I'll try to figure out the numbers for the hi-res version. If it works I'll post a little tutorial to help you out.

Wish me luck

Anonymous

Anonymous Mon 05 Oct 2015 10:51:25 No.531290 Report Delete

Quoted By: >>531297

>>531270
>>531289 here

Hell yeah, I did it.
Stupid numbers, I did manage to fuck up a single byte and it was giving me errors all over, I was about to give up and say we would have to wait for our regular patcher, but I was able to catch my mistake and fixed it.

Manual instructions for 3.1.7 Hi Res:
0001EFE4: 0F95C3 -> 32DB90
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090

I'll do a little tutorial on how to use this on my next post.

>I'm so proud. But all credits go to the original patcher, I merely copied his solution.

Anonymous

View Same Google ImgOps iqdb SauceNAO patch explained.png, 133KiB, 1723x749

Anonymous Mon 05 Oct 2015 12:09:54 No.531294 Report Delete

Quoted By: >>531313 >>531455

Patching mini tutorial

It's actually really simple.
There are 3 instructions. Each instructions has 3 sets of hex numbers. Let's take the first instruction:
0001EFE4: 0F95C3 -> 32DB90

The first number, "0001EFE4" is the offset
The second number "0F95C3" is the original thing you'll find in the program, it's here only as a guide so you know what you'll have to change.
And finally, the last number "32DB90" is what you have to change the previous number into. This is the actual patch.

So, first you make a copy of the pepakura3h.exe to be your backup so you can revert it if you fuck up, and open pepakura3h.exe in HxD (make sure you don't open it as read-only).
Then click Search>Goto... (or hit ctrl+G) and in the dialog that appears you paste the offset (which is 0001EFE4 for the first instruction) and click OK.

The program will scroll down to the specified place and the cursor will be on the first byte (couple of numbers) of the original numbers (in this case it should be on 0F, and you will see 95 C3 right next to it)
Then you simply change those numbers to the ones in the instructions so:
0F will became 32
95 will became DB
and C3 will became 90.
The modifications you do will show up in red. (pic related)

Now all you have to do is repeat these steps for the other two instructions.
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090

Then save the file, open pepakura and test it. If you followed everything correctly it should work fine and you're done.
If anything goes wrong (it shouldn't), just use your backup and try again carefully

This is it. If you still have any doubts, just let me know.

Anonymous

Anonymous Mon 05 Oct 2015 12:35:39 No.531297 Report Delete

Quoted By:

>>531290
Truly original patcher is unknown. Man who post auto-patches here copied his work, then i did the same.

Me Mon 05 Oct 2015 18:28:44 No.531313 Report Delete

Quoted By: >>531314

>>531294
thanks so much....it workd

Anonymous

Anonymous Mon 05 Oct 2015 18:47:50 No.531314 Report Delete

Quoted By: >>531316 >>531317

>>531313
Glad to hear it.
We both learned new things today.

Me Mon 05 Oct 2015 18:54:22 No.531316 Report Delete

Quoted By:

>>531314
yeah I copies and saved your tut....so unless they come out with 3.18 soon, before I forget how to do it then I can stumble along like I did today....again thanks....

Me Mon 05 Oct 2015 18:58:00 No.531317 Report Delete

Quoted By: >>531318

>>531314
yeah I managed to stumble through with minimum mistakes....I saved your tut so if they don't come out with 3.18 any time soon before I forget how to do this well at least I will have your tut to help me stumble along like I did today....lol thanks again

Anonymous

Anonymous Mon 05 Oct 2015 19:02:37 No.531318 Report Delete

Quoted By:

>>531317
Anytime..
And as long as they don't change the way it works I should be able to figure out the offsets on newer versions as long as you can find the .exe. So, one more anon to speed up the patching, I guess.

But if they change something, I guess we're fucked, lol.

Anonymous

Anonymous Thu 08 Oct 2015 05:43:30 No.531455 Report Delete

Quoted By: >>531486

>>531294
changes definitely work, has anyone figured out how to get around needing a keycode, or do I need to find something for that?

Anonymous

Anonymous Thu 08 Oct 2015 14:10:06 No.531486 Report Delete

Quoted By: >>531522

>>531455
You need a serial number - numbers from standard edition won't work.

Anonymous

Anonymous Fri 09 Oct 2015 08:39:30 No.531522 Report Delete

Quoted By: >>531548

>>531486
ahh, that makes sense. any known codes floating about?

Anonymous

View Same Google ImgOps iqdb SauceNAO keygen.gif, 5KiB, 885x55

Anonymous Fri 09 Oct 2015 16:11:20 No.531548 Report Delete

Quoted By: >>531577 >>532229

>>531522
try this keygen:
/k4f5mu7hwi6c.html

Anonymous

Anonymous Sat 10 Oct 2015 03:12:00 No.531577 Report Delete

Quoted By:

>>531548
worked perfectly, thanks!

Anonymous

Anonymous Sat 10 Oct 2015 13:06:03 No.531592 Report Delete

Quoted By: >>531597

What is this patch for?

Anonymous

Anonymous Sat 10 Oct 2015 15:31:49 No.531597 Report Delete

Quoted By:

>>531592
It allows editing for password-protected files. Very useful when you need to change scale or layout.

brazilianboy

brazilianboy Thu 22 Oct 2015 14:49:05 No.532161 Report Delete

Quoted By: >>532174

hi, i try this
Manual instructions for 3.1.7 Hi Res:
0001EFE4: 0F95C3 -> 32DB90
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090

but weird things happend with models, strange characters appear, if i print in pdf happens the same thing, any ideas?

Anonymous

Anonymous Thu 22 Oct 2015 19:29:57 No.532174 Report Delete

Quoted By: >>532229

>>532161
It's still in demo mode

Anonymous

Anonymous Fri 23 Oct 2015 15:46:41 No.532229 Report Delete

Quoted By:

>>532174
Is your copy registered? You can find a keygen here >>531548

me Fri 23 Oct 2015 18:44:32 No.532235 Report Delete

Quoted By: >>532243

3.18
http://www.mediafire.com/download/d43ls1k20hz113v/setup_pepakura_h318_en.exe

Anonymous

Anonymous Fri 23 Oct 2015 22:16:45 No.532243 Report Delete

Quoted By: >>532511

>>532235
Thanks. And here you go. Enjoy

000220F4: 0F95C3 -> 32DB90
0009623A: 01 -> 00
00098360: 894108 -> 909090

me Tue 27 Oct 2015 18:56:41 No.532511 Report Delete

Quoted By:

>>532243
thanks for HD crack....standered?

Subject

Name

E-mail

Password

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these boards

Your latest searches

pepPatch